Stainless Classics
Mag/Dyno Strap - Complete Assembly
This complete mag/dyno strap kit is suitable the B31/B33, A7 and A10 as well as the DBD32/DBD34 BSA Gold Stars made in the late 1950’s and ‘60’s. The kit includ..
£65.00
Mag/Dyno Straps (Pair)
This pair of straps are designed to fit on the B31/B33, A7 and A10 as well as the DBD32/DBD34 BSA Gold Stars made in the late 1950’s and ‘60’s. The longer piece..
£38.00 £40.00
Norton Battery Box Screw
These screws go on the left hand side of all but the very early Featherbed models, including Dominators, Atlas, and the late M50 and ES2 singles in this frame. ..
£5.25
Triumph Steering Stem Nut
This nut is only suitable for those models which are not fitted with a steering damper and have a 1”- 28 UNEF thread. They do not fit the earlier stems which ha..
£11.50 £14.50
Winged Brake Adjuster
This brake rod adjuster is suitable for early Norton Singles, and the Lightweight range such as Jubilee and Navigator from the 1960’s, and indeed for the AMC t..
£12.50 £14.50
BSA A7 & A10 Front Spindle
This spindle is for the later A7 & A10 with the 8" full width hub...
£31.50
BSA A7 & A10 Front Spindle (Ariel FWH)
This spindle is for the A7 & A10 bikes that were produced in the late 1950's with Ariel type full width hubs...
£34.00
BSA A7 & A10 Front Spindle Nut
This nut is for the later A7 & A10 with the 8" full width hub...
£6.50
BSA A7 & A10 Front Spindle Nut (Ariel FWH)
This spindle nut is for the A7 & A10 bikes that were produced in the late 1950's with Ariel type full width hubs...
£7.00
BSA A7 & A10 Rear Dummy Spindle
This is the short spindle which is fitted within the rear hub, on the later A7 & A10 with 8" full width hub...
£35.00
BSA A7 & A10 Rear Spindle
This rear spindle is for the later A7 & A10 with 8" full width hub...
£34.00
BSA A7 & A10 Rear Spindle Set
This rear spindle set is for the later A7 & A10 with 8" full width hub. It comprises the main spindle, "dummy spindle", spindle nut (LHS), spacer,..
£90.00